Haier LET26C430 Flat Panel Television User Manual


 
Introduction
02
P.05
INSTALLATION
CAUTION
Never tamper with any components inside
the TV, or any other adjustment controls
not mentioned in this manual. All -TVs
are high voltage instruments. When you
clean up dust or water drops on the
PANEL or CABINET, the power cord should
be pulled out from the receptacle, then
wipe the TV with a dry soft cloth. During
thunder and lighting, unplug the power cord
and antenna cord to prevent damage to
your TV. All repairs to this TV should only
be performed by qualified TV service
personnel.
LED
LED
Panel
TV System
PAL-B/GID/K
SECAM- B/GD/KL L
Video Signal System PAL/NTSC/SECAM
Input Power Voltage
Power consumption
Audio Output Power THD 7%
2x5W
Signal Input
Analog RGB(PC)x1
High-Definition Multimedia Interface (HDMI)x2
Video Input x1
CVBS Input x1
YPb Prx1
Horizontal definitionTV line
CompositeVideoinput >=350
YPbPr >=400
26"
55 W
Main parameter
Main features
Used as Television, display terminal,
PC display
High luminance, wide viewing
Angle
3 HDMI interface and SCART Interface
4 NICAM
5 Time shift
'
PC Audiox1
USB x 1
CI x 1
Tuner x 1
100-240V~ 50/60Hz
Mini Scart x 1
*Locate the TV in the room where light
does not strike the screen directly.
*Total darkness or a reflection on the
picture screen can cause eyestrain. Soft
and indirect lighting is recommended for
comfortable viewing.
*Allow enough space between the TV and
the wall to permit ventilation.
*Avoid excessively warm locations to
prevent possible damage to the cabinet or
premature component failure.
*Do not cover the ventilation openings
when using theTV.
32"
2x8W
75 W