Filter
Top Products
21
3. 1st and 2nd Audio: Use this function
when two or more audio languages are
broadcast. This is the language to be used
for digital channels if it is available.
4. Channels: Enter the channels submenu,
and choose from Channel Scan, Update
Scan, Single RF Scan, Analog Manual Scan,
Channel Skip, Channel Sort, Channel Edit,
Decoder, and Analog CH Fine Tune.
[Channel scan] - Channel Scan will re-
tune the television automatically. It is
recommended to run the Channel Scan
periodically to ensure that all new services
are added.
[Update scan] - Search the new channels
automatically that are not in the channel list.
[Single RF Scan (Digital Only)] -
Enter the Single RF Scan in the Channels
submenu to scan digital channels.
0%
Picture
Scan single RF channel.(Digital Only)
Sound
TV
Features
Parental
RF Channel 7
Signal Strength 60
Signal Quality Good
Scan Back
EXITOK
fig. 45
[Analog Manual Scan] - The television
can be tuned-in manually using Analog
Manual Scan. Use the number keys to enter
the Start Frequency to scan up or scan
down.
Picture
Search for analog channels.
Sound
TV
Features
Parental
Start Frequency (MHz)
45.00
Scan Up
Scan Down
Back
Exit
fig. 46
[Channel skip] - To prevent certain
programs from being viewed by pressing
CH + / - buttons on the remote control,
the program position can be skipped.
Tip: The skipped program may not be found
by pressing CH + / - buttons but can be
access by pressing number buttons directly.
Tip: The skipped program may not be found
by pressing CH Λ / V but can be accessed by
pressing number buttons directly.
[Channel sort] - Change the order of
the Channel List.
[Channel Edit] - Enter the Channel
Edit in the channels submenu to edit the
channel number and channel name by using
the number buttons 0~9.
Note: The following RC number-mapping
table will not be shown on the TV screen.
0 . @ 0
1 _ - 1
2 A B C a b c 2
3 D E F d e f 3
4 G H I g H i 4
5 J K L j k l 5
6 M N O m n o 6
7 P Q R S p q r s 7
8 T U V t u v 8
9 W X Y Z w x y z 9
Available characters
RC
[Decoder (Analog only)] - Channel
Decode support the Canal+ (paid television
channel); however, the channel also
broadcast some un-encrypted programs.
These programs without encryption can be
viewed free of charge.
[Analog CH Fine Tune] - Select Analog
CH Fine Tune in the Channels submenu to
adjust the frequency.
FEATURES MENU
The Features menu in TV mode shows
as below. This menu gives users the most
flexibilities to satisfy their generally demands.
According to the various requirements in
different source modes, certain features should
be hidden (disable) on the menu. The details
footnotes will be described clearly below.