Haier P42A1-AKS Flat Panel Television User Manual


 
HDMI/DVI OUTPUT R AUDEO L
RGB-DTV OUTPUT R AUDEO L
YPbPr
R AUDEO
HDMI/DVI VIDEO
VGA
AUDIO
DVI IN
AUDIO
VGA IN COMPONENT IN
Pr/Cr Pb/Cb Y L-AUDIO-R
ANT IN
COMPONENT IN
Pr/Cr Pb/Cb Y L-AUDIO-R
SCART2 SCART1
How to connect
1. Connect the DVD video outputs (Y,
Pb/Cb, Pr/Cr) to the YUV IN jacks on the TV
and connect the DVD audio outputs to the
AUDIO IN jacks on the TV, as shown in the
figure.
2. If your DVD only has an SCART output
jack, connect this to the SCART input on
the TV. as shown in the figure.
NOTE: If your DVD player does not have
component video output, use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the TV/AV and VOL+/- button on the
remote control to select SCART mode.
3. Press Play button on external equipment
for program play.
4. Refer to the DVD player's manual for
operating instructions.
-To watch digitally broadcast programs,
purchase and connect a digital set-top box.
How to connect
Use the TV`s YPbPr IN and AUDIO IN jacks,
VGA or HDMI/DVI VIDEO port for video
connections, depending on your set-top
box connections available. Then, make the
corresponding audio connections.
How to use
1. Turn on the digital set-top box. (Refer to
the owner`s manual for the digital set-top
box.)
2. Use TV/AV on the remote control to
select mode.
3.Press Play button on external equipment
for program play.
DVI
DTV connection
DVD connection
External Equipment Connections
DVD
or
Digital Set-top Box
or
or