Filter
Top Products
27
Switching Source Signals
Press the SOURCE button on the
remote control or the TV button on
the control panel to select the
incoming source signal.
The current source setting CH XX
appears on the top left corner of
the screen, AV1 or AV2 appears
on the bottom right corner of the
screen.
Note:
The TV supports S-Video input in addition to normal video and audio
signals. The TV detects the signal type automatically and gives priority to
S-video when two signals are detected at the same time. This auto
detection function is only available for AV2.
Adjusting the Volume
Press the VOL UP button to
increase the volume. Press
the
VOL DOWN
button to decrease
the volume. The volume level
is displayed on the TV.
Press the
MUTE button to turn
the sound off. The word “Mute”
appears on the top left corner
of the screen and sound is
temporarily turned off.
Press the
MUTE button on the remote control or press the VOL UP
button or VOL DOWN button
to restore the original volume.
M
E
N
U
P
O
W
E
R
S
O
U
R
C
E
VOL VOL
CH
CH 40
AV1
Current source setting
TV/AV
Source
M
E
N
U
P
O
W
E
R
S
O
U
R
C
E
VOL VOL
CH
Volume up
Volume down