Filter
Top Products
28
Selecting Channels
Press the CH UP button and the
CH DOWN button on the control
panel to select the channel or
enter the specific channel num-
ber by pressing the number but-
tons on the remote control.
Switching Source Signals
Press SOURCE to select the
incoming source signal.
The current source setting
(TV/CATV, S-Video, or AV)
appears on the top left corner of
the screen.
Note
The TV supports S-Video input in
addition to normal video and audio
signals.
power menu vol ch source
Channel up
Channel down
power menu vol ch source
S-VIDEO
Current source setting