HANNspree ST03-15A1 Flat Panel Television User Manual


 
55
Remote control doesn’t work.
Make sure the battery is inserted correctly.
Replace the battery with a new one.
Make sure the TV power cord is plugged
in.
Make sure the path between the remote
control and the sensor is clear.
Try operating the remote control at a
closer distance to the TV. Don’t exceed an
angle of 30º from the sensor.
No image but have sound.
Make sure the video signal cable is con-
nected properly.
No sound but have image.
Make sure the source device is function-
ing
properly.
Set the volume to a higher level.
Make sure the audio cable is connected
securely.
Turn the mute off.
Screen image turns over.
Make sure the video signal cable is con-
nected
properly.
Snow appears on the screen.
Adjust the location of the antenna, placing
it far from roads or sources of interfer-
ence.
Ceck the antenna and the video signal line
connections.
Blurred or overlapped images.
Readjust the sharpness setting.
Choose programs with high quality sig-
nals.
Adjust the direction of the antenna or
change the video signal cable.
Situation Solution