Filter
Top Products
33
Video Mode
1
Press
VOL UP
or
VOL DOWN
to
switch between Video Mode options:
User: Enables you to set user
defined values.
Dynamic: Sets the display for
enhanced picture contrast and
sharpness (default).
Standard: Sets the display for
normal viewing (default).
Movie: Sets the display to emulate a
movie display (default).
2 In User mode, press CH UP or
CH
DOWN to select Contrast,
Brightness, Saturation, Hue (does
not apply to PAL system), or
Sharpness.
3 Press VOL UP
or
VOL DOWN
to
change the values. A slide bar
appears for each option.
4 Press VOL UP to increase the
chosen option’s value. Press
VOL DOWN
to decrease the value.
5 Press menu to confirm the setting.
Note
The new setting is confirmed
automatically when the OSD times out.
Picture
Preset
Video Mode User
NR Off
Color Temp Neutral
Contrast
Brightness
Saturation
Hue
Sharpness
40
47
40
25
04
Adjust :
Select :
CH
VOL
Return :
MENU