Filter
Top Products
Page 3For technical questions, please call 1-800-444-3353.SKU 92588
unqualied personnel could result in a
risk of injury.
The warnings, precautions, and 12.
instructions discussed in this manual
cannot cover all possible conditions and
situations that may occur. The operator
must understand that common sense
and caution are factors, which cannot
be built into this product, but must be
supplied by the operator.
ASSEMBLY INSTRUCTIONS
Unpack, and lay the Kite (bottom side 1.
up) on a at, level surface.
Insert each end of the 15” Tension Pole 2.
(1) into a Socket located on the edge
toward the front end of the Kite.
Insert a 25” Tension Pole (2) midway 3.
through a 5-1/2” Brace (3). Then, repeat
this Step for the remaining 25” Tension
Pole and 5-1/2” Brace.
Insert one end of the 25” Tension Pole 4.
(2) in the Socket located into the rear/
center of the Kite. Then insert the other
end of the 25” Tension Pole into a Socket
located on the edge toward the rear
end of the Kite. Repeat this step for the
remaining 25” Tension Pole.
Insert the end of each 5-1/2” Brace (3) 5.
into a Socket located toward the rear.
Tie the String from the String Wheel 6.
(4) onto a String Ring (5). Repeat this
Step for the remaining String Wheel and
String Ring.
STRING
RING
(5)
STRING
RING
(5)
SOCKET
SOCKET
SOCKET
SOCKET
SOCKET
15” TENSION POLE (1)
SOCKET
25”
TENSION
POLE
(2)
25”
TENSION
POLE
(2)
5-1/2” BRACE (3) SOCKET
FIGURE A
STRING WHEEL
(4)