Filter
Top Products
6 SPEAKER PLACEMENT
Speaker Placement
Color-Coding System
The HKTS 2 uses the channel color-coding
system established by the Consumer Electronics
Association to make setting up your home
theater speaker system as easy as possible. Your
system includes a set of colored stickers that
may be placed near the speaker terminals of
each of the two satellite speakers according to
the key below. (The powered subwoofer is
already color-coded for you.)
Front Speakers
The front speakers should be placed the same
distance from each other as they are from the
listening position. They should be placed at
about the same height from the floor as the
listeners’ ears will be, or they may be angled
toward the listeners.
Subwoofer
The low-frequency material reproduced by the
subwoofer is mostly omnidirectional, and this
speaker may be placed in a convenient location
in the room. However, the best reproduction of
bass will be heard when the subwoofer is placed
in a corner along the same wall as the front
speakers. Experiment with subwoofer placement
by temporarily placing the subwoofer in the
listening position and moving around the room
until the bass reproduction is best. Place the
subwoofer in that location.
Satellites
The satellite speakers may be placed on a shelf.
They may be wall-mounted using the supplied
brackets.
Speaker Sticker (or Terminal)
Position and Cable Color
Front Left White
Front Right Red
Subwoofer (LFE) Purple
White Red
Purple
White Red
0127CSK - HK TS2_ENG.qxp:29515_HKTS2_English 18/03/09 16:07 Side 6