Heat Controller B-VMH 36SC-1 Universal Remote User Manual


 
Heat Controller, Inc. REMOTE CONTROLLER Owner’s Manual
8
3
2
1
1
Ensure power is available to the unit. The OPERATION
indicator on the display panel of the indoor unit illumi-
nates.
1. Press the MODE button to select DRY mode.
2. Press the TEMP button to set the desired tempera-
ture. The temperature can be set within a range of
62°F (17°C)~88°F (30°C) in 2°F (1°C) increments.
3. Press the ON/OFF button to start the air conditioner.
NOTE
In the Dehumidifying mode, you can not switch the fan
speed as it is being automatically controlled.
Dehumidifying operation
Swing operation
direction.
direction setting feature of the louver is activated. The
angle of the louver changes by 6° each time the but-
ton is pressed. Keep pressing the button to move the
louver to the desired position.
2. By pressing the SWING button without releasing it for
2 seconds, the auto swing feature of the louver acti-
vates. The horizontal louver swings up/down automati-
cally. Press it again to stop.
NOTE
When the louver moves to a position which would affect the
cooling and heating effect of the air conditioner, it will auto-
matically change the swing/louver direction.