Filter
Top Products
5. Change the #10 system maintenance switch setting to the On position.
You can use a plastic ball-point pen to flip the system maintenance switch.
6. Replace the top cover.
Verifying the system maintenance switch setting
After you switch the setting, verify that the #10 system maintenance switch is in the On position.
NOTE: The following instructions use iLO 2. For complete information and instructions on using
iLO 2, see the HP Integrated Lights-Out 2 User Guide on the HP website at http://www.hp.com/
bizsupport/TechSupport.
1. Log in to iLO 2. For instruction, see the HP Integrated Lights-Out 2 User Guide.
2. Select System Information on the left navigation bar.
10 Installing the fans