HP (Hewlett-Packard) PL5070N Flat Panel Television User Manual


 
Getting to Know Your TV
Getting to Know Your TV 5
TV (rear) Description
Service Port
Used for repair
purposes only.
Serial RS-232
Used for commercial
purposes only.
ANT/Cable In
Connect a coaxial cable
from an off-air antenna or
cable signal source.
Standard
Definition Input:
AV1: S-Video
In, Video In,
and Audio In L
and R
AV2: S-Video
In, Video In,
and Audio In L
and R
For each AV connector set:
Connect an S-Video
cable and left-right
audio cables from
optional equipment.
Or
Connect a composite
video cable and left-
right audio cables from
optional equipment.
(Audio In L and R connectors
are shared within the AV
connector set.)
!
Do not connect video cables to both the
S-Video In and the Video In connectors.
TV (rear) Description
High Definition
Input:
1: Component
In Y, Pb, and Pr,
and Audio In L
and R
2: Component
In Y, Pb, and Pr,
and Audio In L
and R
Connect component video
cables and left-right audio
cables from optional
equipment. Supports 480i,
480p, 720p, and 1080i
analog standard and
high-definition format
inputs. The TV automatically
determines what has been
connected. Some set-top
boxes must be set for a
specific output resolution.
Digital High
Definition Input:
HDMI 1 with
HDMI Audio
In L and R
HDMI 2
HDMI 3 (select
models only)
Supports 480i, 480p,
720p, 1080i, and 1080p
digital format inputs. The TV
automatically determines
what has been connected.
Some set-top boxes must
be set for a specific
resolution out.
For each HDMI
(High-Definition Multimedia
Interface) connector:
Connect an HDMI cable
from optional digital, high-
definition equipment.
For HDMI 1 with HDMI
Audio Input: Connect a DVI
cable and DVI-to-HDMI
converter from optional DVI
equipment and connect left-
right audio cables to HDMI
Audio In L and R.
PC Input:
VGA
Audio L/R
Connect a VGA cable and
an audio cable from your
PC (Line Out) to use the TV
as a monitor.
Audio Output:
Digital
(Optical)
Audio Output
L and R
For sound to an external
audio system:
Connect an optical
cable for digital sound
out to an optional
external digital audio
system.
Connect left-right audio
cables for stereo sound
out to an optional
external (analog) audio
system. Use the left
(white) connector for
mono sound (single
cable).
AC In
Connect the included AC
power cord.
NOTE: Use only the
provided power cord.
TV (rear) Description (Continued)