Filter
Top Products
-SET UP- FUNCTIONS
24
If certain CATV channels are poor or not possible in the CATV mode, set the -
AIR/CABLE- select to CATV2.
• AUTOPROGRAM
This feature will automatically store active TV channels in CHANNEL MEMORY. This
will allow you to skip over unused channels when using the CHANNEL UP ( ) or
DOWN (
) buttons.
If the MENU button is pressed while the autoprogramming function is engaged,
programming will stop.
See CHANNEL MEMORY to add or erase additional channels.
• CHANNEL MEMORY
Use this function after AUTOPROGRAM to add or erase additional channels to the
remote control CHANNEL , buttons.
Add or erase additional channels while still in CHANNEL MEMORY using the
CHANNEL
, buttons or number buttons and then add or erase using the CURSOR
, buttons. Remember to set the remote control MULTI-PAGE SELECT SWITCH to
"TV" mode to change channels and set to "MENU/CATV" mode to add or erase
channels.
• CLOCK SET
Use the same remote control buttons as shown in previous examples to display the
clock setting, press MENU, 1, ENTER, 2, ENTER, 4, ENTER.
Once the proper time is set (including AM or PM), press MENU to start.
2
• CHILD LOCK
This function will block out the picture and sound of the selected channel. Press MENU, 1,
ENTER, 7, ENTER to display CHILD LOCK.