Filter
Top Products
18
CONNECTION (continued)
Connecting Procedure (continued)
Headphone The detail settings can be adjusted from Audio Menu on page
29
.
The audio from the speaker will be muted when connecting the headphone to this terminal.
4. Connecting the plug into the wall socket
Connect the Power Cord after completing all other connections.
(The type of plug is different from this drawing for some
countries.)
(1) Connect the power cord to this device.
(2) Fix the power cord cable to the clamp.
(3) Connect the power cord to the power outlet.
CAUTION
Ɣ Use only the Power Cord provided.
Ɣ Do not use a power supply voltage other than that indicated (AC110-240V, 50/60Hz). It may cause fire or electric
shock.
Ɣ For the LCD panel, a three-core power cord with a ground terminal is used for efficiency protection. Always be sure to
connect the Power Cord to a three-pronged grounded outlet and make sure that the cord is properly grounded. If you
use a power source converter plug, use an outlet with a ground terminal and screw down the ground line.
Ɣ Ensure that both ends of power cord are easily accessible.
Ɣ If you have to change the power cord, please use the certified power cord that meets your region’s safety standard.
Information
Ɣ How to secure the cable
After connecting all of the cable to the terminals, sevure them
with the band.
When you secure the cables, please be careful not to tignten
too much.
(Mini Stereo Plug)
Downloaded From TV-Manual.com Manuals