Filter
Top Products
Installation (cont.)
- 7 -
Optional Equipment Connection and Operation
To Audio AMP Connection (Stereo)
• To Audio AMP
Connect to an external audio amp auxiliary input for monitoring sound through a stereo system.
NOTE: “TO AUDIO AMP” terminals cannot be used for external speakers.
Operation - When an audio amp is connected to “TO AUDIO AMP” terminals as shown:
1. Select SPEAKERS ON located in the onscreen AUDIO menu.
2. Set amplifier volume to minimum.
3. Adjust TV volume to desired level.
4. Adjust amplifier volume to match the TV.
5. Select SPEAKERS OFF & VAO (Variable Audio Out) from AUDIO menu.
6. Volume and mute are now controlled using the TV controls.
Audio/Video Connection
Operation
1. Connect equipment as shown to front or rear Audio/Video input jacks.
2. Select the Video mode by pressing the INPUT button.
3. Operate optional equipment (VCR-VDP) following their respective equipment manual.
NOTE: The S-VIDEO connection is optional and overrides other VIDEO connection. Use INPUT 2, AUDIO R and L with
S-VIDEO connection.
TO AUDIO
AMP
VIDEO
S-VIDEO
R
AUDIO
L
COMPONENT
VIDEO INPUT
P
R
Y/VIDEO
P
B
R
L
INPUT 1
R
AUDIO
L
INPUT 2
CABLES NOT SUPPLIED
TERMINALS ON BACK OF TV
L
R
AUDIO OUT
AUDIO AMP
TO AUDIO
AMP
VIDEO
S-VIDEO
R
AUDIO
L
COMPONENT
VIDEO INPUT
P
R
Y/VIDEO
P
B
R
L
INPUT 1
R
AUDIO
L
INPUT 2
L
R
AUDIO OUT
VIDEO OUT
VCR
ANT INPUT
CABLES NOT SUPPLIED
OUTPUT
TERMINALS ON BACK OF TV
S-VIDEO OUT
L AUDIO IN R
VIDEO 3
Jack used for 1/8”
headphone plug
TERMINALS ON FRONT OF TV
HPJ
0335E2new.fm Page 7 Tuesday, April 25, 2000 4:10 PM