Hitachi 35HDL52 Flat Panel Television User Manual


 
17
English
SUBWOOFER Output
Connect this SUB WOOFER OUT output to the external audio component input.
AUDIO Output
These jacks provide fixed audio signal which are used for recording.
MONITOR Output (S VIDEO)
This jack provides S video signal which are used for recording. (Please refer to monitor output table as below)
MONITOR Output (VIDEO)
This jack provides video and audio signals which are used for recording. (Please refer to monitor output table as below)
Monitor output table:
(a) Normal mode:
Output
Input
S-VIDEO VIDEO AUDIO
DTV
NTSC
×
VIDEO1/ VIDEO2
× × ×
VIDEO3/ VIDEO4
(VIDEO)
×
VIDEO3/ VIDEO4
(S-VIDEO)
×
ANALOG RGB
× × ×
DVI
× × ×
(b) For POP/PIP mode:
The monitor output is according to user‘s selected source, the speaker’s position.
The output table should be the same with the above table.
L/MONO /R (VIDEO 1 and VIDEO 2)
Connect audio of external devices.(if you have mono sound, insert the audio cable into the left (L) audio jack).
Y-PBPR (VIDEO 1 and VIDEO 2)
Provide Y-P
BPR jacks for connecting equipment with this capability, such as a DVD player or Set Top Box
NTSC TUNER
RF input that connects to the antenna, cable box, or CATV cable. Support NTSC TV system.
DTV TUNER
RF input that connects to the antenna, cable box, or CATV cable. Support ATSC TV system.