31
English
27. SWIVEL FUNCTION
1. Press swivel button
After pressing swivel button on the remote, OSD indicator will display on TV screen.
The OSD indicator will disappear, if stop manipulating remote in 15 seconds.
2. Adjust swivel by pressing direction button
Press left button to turn swivel left and press right button to turn swivel right.
The rotation angle of swivel is ± 30 degree.
3. The rotation will stop if the direction button is released.
4. Swivel can not be used during Auto Scan Mode.
NOTE: A Cable tie is used to bundle all the signal cables together and makes the cable connections tidy.
In accessories pack , there are two different type of cable tie to meet user’s requirement.
Put the power cord through the cable clamp which is attached to the back of the TV and then tie it
with other cables by cable tie.
ATTENTION
• Do not push the panel manually while using the swivel function. It could cause damage to the stand or the panel.
•
Do not get on and hang from the TV. Do not swing the TV back and forth and around either. It could cause a failure of the stand.
•
Do not put hands or faces close to the TV while operating the swivel function. It could cause a physical injury. Use special caution in
households where children are present.
• Do not put any object, like a vase, near the TV in swiveling area. It would cause a breakage of the object and /or a failure of the
stand.
• Place the TV on the stable location, or the swivel function would not operate correctly. It would cause a malfunction.
• In the case of using the TV wall mounted, be sure to detach the connecting cable between the TV and the stand.