Filter
Top Products
25
English
Français
HOW TO USE THE REMOTE
TO CONTROL YOUR PLASMA TV
8. DTV button
Press to switch directly to DTV mode.
9. NUMBER buttons
Use Number buttons to choose specific channel. For example when choose channel 27, first press 2 and then press 7. When choose
101, first press +100 and 0, then press 1.
10. RETURN button
Press this button to toggle between the current and last channel viewed and press jump back to last page of OSD.
11. EXIT button
This button will exit all On-Screen Displays.
12. MENU button
The MENU button will start the OSD.
13.
ț ȝ W X buttons
Press Up/Down/Left/Right buttons to adjust the options under OSD menu.
14. SEL button
Press SELECT button to select the functions under OSD menu.
15. CHANNEL+/- buttons
Press Channel +/ Channel - buttons to change channels under TV mode.
16. VOLUME+/- buttons
Press Vol+ / Vol- buttons to increase and decrease the volume.
17. DTV MENU button
Press to access DTV OSD menu for features adjustment.
18. BACK button (for DTV mode only)
In viewing mode or in the Channel Banner, toggles between the current and previous channel within the same channel list. In the
menu, returns to the previous screen.
19. OK button (for DTV mode only)
In viewing mode, brings up the current Channel List and the Channel Banner. In the menu, selects the currently highlighted menu item
or confirms your choices.
20. FAV CHANNEL button (for DTV mode only)
Press to switch directly to your favorite channel.
21. INFO button (for DTV mode only)
Switch between Viewing mode, Channel Banner, and Channel Banner with Extended Info.
22. PC ADJ. button (not available for 480p/720p/1080i signals)
When the image is not even or not in the center of the screen under PC mode, press this button for auto adjustment.
23. FREEZE button
Freeze button allows user to temporarily pause current image. Press to freeze the image. Press again to restore the picture.
24. C.C button
Press to switch directly to open close caption function.