Filter
Top Products
AV NET SETUP WIZARD ( Example: A/V RECEIVER
Setup)
1. Press the SELECT button to start the SETUP
WIZARD.
2. Use the CURSOR PAD ̆ or ̄ to highlight YES or
NO.
3. Press the SELECT button to select “YES”.
(Select YES to setup an A/V Receiver or NO to setup
other devices).
4. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to highlight
NEXT, then press the SELECT button to move on to
the next SETUP screen.
5. Use the CURSOR PAD ̇ or ̈ to choose the brand
name of your A/V Receiver.
6. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to highlight
NEXT, then press the SELECT button to move on to
the next SETUP screen.
7. Use the CURSOR PAD ̇ or ̈ to choose the preset
IR Code.
8. Use the CURSOR PAD ̄ to highlight the “ POWER ”
Test button.
These On-screen buttons are called “ Soft Keys ”.
9. Press the SELECT button to pass the Power
command through the
IR mouse and onto the A/V Receiver
( Repeat steps 7 to 9 until finding the IR code that will
power up
the A/V Receiver. If the A/V Receiver turns ON, then
you have
found the correct preset IR code ).
10. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to highlight
NEXT, then press the SELECT button to move on to
the next SETUP screen.
11. Use the CURSOR PAD ̇ or ̈ to select the TV Input
that connects
to the video and audio output of the A/V Receiver.
12. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to highlight
NEXT, then press the SELECT button to move on to
the next SETUP screen.
59
Setup
On-Screen Display
Welcome to the AV Net Setup Wizard.
Before starting this wizard, please make sure
that all devices are connected appropiately
and the IR blasters are placed in front of the
devices IR sensor.
AV Net Setup Wizard
Move
SEL
Return
Back
Start
Do you want to use an A/V Receiver.
Yes
No
AV Net Setup Wizard : A/V Receiver Setup
Move
SEL
Select
Back
Next
Please choose the Brand Name of your
A/V Receiver. If you can not find the
Brand Name, please choose “Other” and
proceed to the Learning mode by pushing
the Learning Mode Button.
Brand Name Hitachi (1/54)
AV Net Setup Wizard : A/V Receiver Setup
Move
Change Brand Name
Back
Learning Mode
Next
Please choose the IR Code Set number.
If the matched Code does not exist,
please choose “Other” and proceed to
the Learning mode.
IR Code Set
Test Button
1 (1/12)
Brand Name Hitachi (44/54)
AV Net Setup Wizard : A/V Receiver Setup
Move
Change IR Code
Back
Learning Mode
Next
POWER SOURCE 1 VOL ̆
Brand Name
TV Input Not Connected
TV Input Settings
If you connect the video or audio
output of the A/V Receiver to this TV,
please select a TV Input.
3 (3/12)
Brand Name Hitachi (44/54)
AV Net Setup Wizard : A/V Receiver Setup
Move
Change Input
Back
Next
SEL
Select