Filter
Top Products
79
On-Screen Display
Set The Quick Start Options
Setup
Select OFF to save electricity
O On
Move SEL Select
Select ON to have the TV tune channels
quickly at 1st turn on and to use the IEEE1394
function in Stand-By-mode.
Reset The Software
Setup
Move
SEL Return
Main Vxxxx.xxxx
MMC Software Upgrade:
Upgrade Now
Please Insert MMC card
Reset TV Settings
No Yes
(Select "Yes" to return all settings to the factory
default after main power OFF/ON.
)
Set The Inputs
Set The Screen Saver
Set The AV Net
Set The Menu Options
Set The Closed Captions
Set The Output Terminals
Set The Quick Start Options
Setup
Reset The Software
Move SEL Select
OR
Set The Inputs
Set The Screen Saver
Set TheAVNet
Set The Menu Options
Set The Closed Captions
Set The Output Terminals
Set The Quick Start Options
Setup
Reset The Software
Move SEL Select
OR
OR
before upgrading.
OR
Set The Quick Start Options
Setup
Select OFF to save electricity
O On
Move SEL Select
Select ON to have the TV tune
channels quickly at 1st turn on.
OR
HDT Models
HDX Models
Setup
Set The Quick Start Options
This feature will select QUICK START UP options. Set
this feature to ON to have the TV tune channels (both
Analog and Digital) quickly when first turning the TV on.
Set this feature to OFF to save electricity. Selecting ON
for the QUICK START UP feature will activate the TV
tuners circuits when the TV is in “standby mode” which
is commonly referred to as “off”. This will allow you to
quickly tune to channels when first turning the TV on.
Digital signals often change and this feature will
monitor any changes and prepare the television to
quickly present a picture. A small amount of electricity
is used to continually monitor signals when this feature
is selected.
Reset The Software
This feature shows software information and easy
upgrade procedure. This function allows the TV
software to be upgraded by using a flash card (MMC
CARD). If a future software upgrade is required for your
TV, HITACHI will notify and provide you with a flash
card. In order to receive written notification and the
flash card, please complete and return the warranty
card.
1. Insert MMC CARD
2. Press the CURSOR PAD
̆ or ̄ to highlight
UPGRADE NOW.
3. Press the SELECT button to select and start
upgrading.
4. Unplug the AC power cord when the UPGRADE is
complete.
NOTE: Any power interruption during the upgrade
process will cancel the upgrade. When this
happens, repeat the upgrade procedure.
This feature also sets the IEEE1394 function in Stand
By-mode to ON or OFF. Certain digital devices have a
power save feature, in which the device automatically
power OFF when not in use (sleep mode). Only by setting the
IEEE1394 function in Stand-By mode to ON, will the TV
be able to control a device that is in sleep mode.
NOTE: 1. By turning on the IEEE1394 function, your TV
will no longer be set for power saving Stand-
By mode. The IEEE Stand-By function must
be set to OFF to return your TV set to power
saving Stand-By mode.
2. When setting the Quick Start option to ON
the option of Reset TV Settings will not
operate.