Filter
Top Products
26
PICTURE-IN-PICTURE (PIP)
SPLIT MODE PICTURE-IN-PICTURE
Split Mode PIP displays the main picture and sub-picture evenly on the screen.
ባ SURF button PICTURE-IN-PICTURE
This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures, Press
the SURF button a second time or EXIT button to remove the sub-pictures from the screen.
ቤ SWAP button (with PIP ON)
Press this button to toggle between the Main and Sub picture which is highlighted with a green border around the picture. Picture
sound and channel can be controlled when it is highlighted.
NOTES: 1. If no buttons are pressed when in SURF mode, auto-scanning will continuously scan channels in memory
(see page 42).
2. If a channel is tuned during this SURF scanning, sub-pictures will be removed from the screen.
3. SURF MODE PIP is allowed only when ANT A/ANT B is selected as the main channel.
4. If MOVIE/TV RATINGS lock functions setting is ON, SURF mode will be deactivated.
5. Closed Caption will not appear when SURF mode is on.
6. While in SURF scanning mode, press SELECT on the remote control to stop on a chosen channel. Press SELECT
again to resume SURF scanning.
NOTE: The SWAP button will only operate in PIP/POP/SPLIT PIP mode.
Ant A 28
Ant A 10
ብ PIP MODE button
To change between the different PIP modes (POP, PIP, SPLIT) press the PIP MODE button when PIP is ON. Each press of
this button will change PIP to a different mode.
PIP MODES will depend on the type of input signal.
SURF
PIP MODE
PIP MODE
Ant A 12
Ant A 10
Ant A 12
SURF
PICTURE-IN-PICTURE (PIP) MODES
POP PIP SPLIT SURF
YES x YES YES
YES x YES x
x x YES x
x x YES x
x YES YES x
Antenna Analog Channels(ANT A/B)
480i
480p
720p
1080i
Ant A 10
Ant A 12
Main Picture
Sub Picture
SWAP
SPLIT
Ant A 12
THE REMOTE CONTROL
Ant A 10
Ant A 10
Ant A 12
NOTE: The 480i, 480p, 720p and 1080i signals should be connected to the video inputs.
1
23 4
5
67 8
9
10 11 12
or
EXIT