Hitachi 50EX11BV/12KV Projection Television User Manual


 
-SOUND- FUNCTIONS
38
-SOUND- FUNCTIONS
Press MENU, 3, ENTER to display the -SOUND- functions.
SOUND PROGRAM is for your preferred settings - balance, bass and
treble.
SOUND SETTING is used to improve the sound quality.
SOUND PROGRAM
You can have two sets of preferred settings, PREFERENCE-A,
PREFERENCE-B or use the factory PRESET settings.
Press MENU, 3, ENTER, 1, ENTER to select the SOUND PROGRAM.
Press the CURSOR buttons to select and make adjustments.
BALANCE - This function will control the left, right balance of the TV
internal speakers, the AUDIO TO HI-FI output, and the surround speakers.
BASS - This function controls the low frequency audio to all speakers.
TREBLE - This function controls the high frequency to all speakers.
SOUND SETTING
Use the sound settings to improve the sound performance of your TV
depending on listening conditions.
Press MENU, 3, ENTER, 2, ENTER to display the SOUND SETTING.
Use the CURSOR , to select a function.
Press ENTER to set a function or to turn it on or off.
MTS MODE (Multi-Channel Television Sound)
will allow you to select STEREO (a stereo broadcast), SA (second audio)
program which may be a secondary language, weather report, etc. or
MONO (monaural sound) used when receiving a weak stereo broadcast.
The sources received will be displayed below the channel number. The
source you select will be displayed to the left of the channel number. See
example below for each selection when both stereo and second audio are
received (monaural is always received).