Filter
Top Products
AUDIO SYSTEM SET-UP - 17 -
operating guide for more information on "line" input-output connections.
AUDIO SYSTEM SET-UP
Match the numbers below to the diagram for speaker placement and refer to the table
for the different surround sound requirements.
The television's internal speakers.
These speakers are connected to a separate audio amplifier. Use the "Audio to Hi-Fi"
output on the TV.
These speakers are connected to the Rear Speaker 8 Ohm output on the TV.
(Click to see Audio System Set-Up)
* See page 10 for location of Surround Switch.
THE REMOTE CONTROL (CLU-413UI)
In addition to controlling all the functions on your HITACHI Projection TV, the new
remote is designed to operate different types of VCR's and different types of CATV
(Cable TV) converters with one touch. Basic operation keys are grouped together in one
area.
To operate your TV, point the remote at the remote sensor of the TV, and press the TV
button on the remote. The remote will now control your TV.
To operate your VCR, point the remote at the remote sensor of the VCR, and press the
VCR button. The remote will now control your VCR.
To operate your Cable Box, point the remote at the remote sensor of the Cable Box,
and press the CABLE button on the remote. The remote will now control your Cable
Box.
Click to see the Remote
These buttons allow the remote to control your TV, VCR, or Cable Box depending of
which mode is chosen, as explained above.
, LIGHT BUTTON