Filter
Top Products
13
TIPS ON REAR PANEL CONNECTIONS
S-Video connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections
in place of the standard video connection if your device has this feature.
If your device has only one audio output (mono sound), connect it to the left audio jack on the television.
Refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up cables.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output (INPUT: 1 in the
example on page 12.) Refer to your VCR operating guide for more information on line input-output connections.
You may use VIDEO, S-VIDEO, or COMPONENT: Y-C
b
C
r
inputs to connect to Input 2, but note that only one of these may be used
at a time.
Connect only 1 component to each input jack.
COMPONENT: Y-C
b
C
r
connections are provided for high performance components, such as DVD players. Use these connections
in place of the standard video connection if your device has this feature.
When using the Y-C
b
C
r
input jacks, connect your components audio output to the TV’s Input 2 Left and Right Audio input jacks.
Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y ouput to the TV’s Cb input
and the components R-Y output to the TV’s Cr input.
It may be necessary to adjust TINT or turn AUTO COLOR-ON to obtain optimum picture quality when using the Y-C
b
C
r
inputs. (See
pages 49 and 50.)
To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-C
b
C
r
jacks.
When using the Y-C
b
C
r
jacks, Input 2 will be viewed as a blank PIP sub-picture. (See page 24.)