Hitachi 51F710G, 57F710G Projection Television User Manual


 
50
Setup
On-Screen Display
Manual Convergence Adjustment Mode
(9 Point Manual Adjustment)
NOTE: 1. Please turn ON your television for at least
20 minutes before using this feature.
2. AUTO ADJUSTMENT MODE is
recommended. If convergence is still not
acceptable, use the MANUAL
ADJUSTMENT MODE.
3. If AUTO ADJUSTMENT MODE is selected
or the MAGIC FOCUS button is pressed,
all manual adjust mode settings will be
erased.
Using the Remote Control, select SETUP, MAGIC
FOCUS TUNE UP, MANUAL ADJUSTMENT MODE, 9
POINT MANUAL, START to access convergence 9
point pattern. The adjustment point is indicated by the
Adjustment Point Cursor.
To Move Adjustment Point
To move the Adjustment Point Cursor using the
CURSOR buttons, the Adjustment Point Cursor must
be WHITE. Another way to move the Adjustment Point
Cursor is to press the following buttons: [2] up, [4] left,
[5] down, [6] right. If you use the number buttons while
the adjustment point is WHITE, it will change to RED.
To Change the Color of Adjustment Point
Press the SELECT button repeatedly (WHITE-RED-
BLUE-WHITE...). GREEN color is fixed and cannot be
adjusted.
To Adjust the Convergence
Move the Adjustment Point Cursor to the point to be
adjusted. Use the CURSOR buttons to match the RED
and BLUE colors to GREEN (reference color). Properly
aligned, all three colors should appear white.
If convergence is acceptable after MANUAL
CONVERGENCE adjustment, press EXIT button to
access menu mode.
1. Use the CURSOR buttons to highlight your chosen
option.
2. Press the SELECT button to select.
3. Select CANCEL to cancel adjusted data and return
to main picture.
4. Select DONE to save your adjustments and return to main picture.
5. Select BACK to return to the manual convergence adjustment mode.
6. Select RESET to recall the factory pre-set convergence data.
Magic Focus Tune Up
Setup
Move SEL Return
Manual Adjust
Please make a selection from
the options below.
Cancel Done Back Reset
EXIT
MENU
Set The Inputs
Menu Preference
Set Closed Captions
Magic Focus Tune Up
Upgrades
Set Monitor Out
Quick Start Up
Setup
Move SEL Set
Move SEL Select
Setup
Timers
Locks
Channel Manager
Audio
Video
Magic Focus Tune Up
Setup
Move SEL Return
Align the Red, Green and Blue colors
to correct for Magnetic Influences.
Adjustment Mode : 9 Point Manual
At Turn Off, after 90 days.
If you want to adjust now Start
Adjustment
Point
Cursor
OR