Filter
Top Products
15
First time use
The RIGHT SIDE panel jacks are provided as a convenience to allow you to easily connect HDMI or DVI signals
from a DVD, Set Top Box , Video Game as shown in the following examples (When connecting DVI signal it will
NOTE: 1. Completely insert connection cord plugs when connecting to side panel jacks. If you do not, the
played back picture may be abnormal.
The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set
Top Box to your Plasma TV is dependent on the model and features of each component. Check the
owner’s manual of each component for the location of video and audio inputs and outputs.
The following connection diagrams are offered as suggestions. However, you may need to modify them to
accommodate your particular assortment of components and features. For best performance, video and
audio cables should be made from coaxial shielded wire.
Before Operating External Video Source
Connect an external source to one of the INPUT terminals, then press the INPUTS button to show the
INPUTS menu. Use the CURSOR PAD (̆ and ̄) to select the Input of your choice. Then press
the SELECT button or the CURSOR PAD ̈ to confirm your choice (see page 28).
R
AUDIO
L/MONO
Y / VIDEO
INPUT 5
OUTPUT
R L
P
R
P
B
DIGITAL OUTPUT
DVI to HDMI
Cable
Back of
HDTV Set-Top-Box or
DVD Player
HDMI DIGITAL
OUTPUT CAPABILITY
DVD , Set Top Box,
Video Game Console.
Photo Input
IEEE 1394
Cable
Air /
Input 1
Move SEL Sel.
Input 2
Right Side Panel
Right Side Panel
Left Side Panel
DVI DIGITAL
OUTPUT CAPABILITY
DVD , Set Top Box,
Video Game Console.
need to connect the audio output into the Left Side Input jacks) :
A) Connecting HDMI signal.
B) Connecting DVI signal.
specifications.
Note : Special device cables will be
according to the own device
Connecting External Video Sources