Filter
Top Products
42
ASPECT
Mode
This function manually selects the ASPECT Mode from six (6) choices.
Use the CURSOR buttons ̆, ̄, ̇ and ̈ to select menu item.
Press the CURSOR button to select.
Auto Aspect
Automatically adjust the Aspect Ratio depending on the input signal to fill the screen.
Use the CURSOR button to highlight the Auto Aspect box.
Use the SELECT button to select. A “✓” in the box indicates that the feature is ON.
Vertical Position
This function allows you to select when aspect style is either 4:3 EXPANDED/ZOOM1/ZOOM2 or 16:9 ZOOM. Vertical position can be
changed with these modes. For example, it will be useful for centering the picture area at both the top and bottom of the picture with
480i/480P signal. Adjustable range is -10 (video center is toward bottom of screen) to +10 (video center is toward top of screen).
Press the CURSOR buttons ̆ or ̄ to select menu item.
Press the CURSOR buttons ̇ or ̈ to adjust the function.
Press EXIT to quit the MENU or select Aspect to return to the main menu.
Use this function to select the Picture Format Aspect Ratio.
NOTES: 1. The Auto Aspect function is recommended on an input signal with VIDEO ID.
2. The Auto Aspect function is best used on composite video, S-Video, and 480i component signals.
3. See page 21 for Aspect Mode availability.
NOTE: Vertical Position will not be available in 4:3 Standard and 16:9 Standard modes.
Aspect
Move
SEL
Return
0
Mode
16:9 Standard 16:9 Zoom
4:3 Standard 4:3 Expanded
4:3 Zoom1 4:3 Zoom2
Auto Aspect
Vertical Position
Locks
Chan. Manager
Aspect
Audio
Video
Move
SEL
Sel
Timers
Setup
2 times
or
Aspect
ON-SCREEN DISPLAY