Filter
Top Products
61
57” Disassembly/Assembly Instructions
Useful Information
IMPORTANT POINTS:
(a) Do not attempt to perform this work by yourself.
(b) Request an installation specialist to install this unit.
(c) HITACHI assumes no responsibility or liability for injury/damage as a result of consumer installation and
handling. Be advised that improper consumer installation/handling is not covered by manufacturer’s warranty.
(d) This Projection Television weighs 205 pounds and has many sensitive components.
CAUTION: DISCONNECT UNIT FROM POWER SOURCE BEFORE DISASSEMBLY/ASSEMBLY
STEP 2
Remove 4 screws (³, ·, », ¿) that hold the
screen frame to the cabinet on the Right side, see
(a) and (b). Repeat to remove 4 screws on the Left
side.
STEP 3
Please remove the screw (³) below screen
frame that hold the back cover to the cabinet as the
arrow shows, see (a).
Please remove the screw ( ) below screen
frame that hold the back cover to the cabinet as the
arrow shows, see (b).
¿» · ³
¿
(a) (b)
(a)
(b)
³
·
(a) left side
(b) right side
·
DISASSEMBLY PROCEDURE
NOTE: Read all instructions and understand how to properly and safely disassemble and assemble unit
STEP 1
Before disassembling this projection TV set, you
must first remove the two screws that hold the
speaker grille on each side of the TV(a)(b). Then
(d)
(c)
(e)
(f)
(g)
(a)
(b)
by pulling outwards remove the speaker grille (c)(d).
Remove the front decoration panels by unscrewing
the 2 screws from each panel (left & right), see (e),
then remove from the original position, see (f)(g).