Filter
Top Products
75
(c)
(d)
65” DISASSEMBLY/ASSEMBLY INSTRUCTIONS
1 - SEPARATION PROCEDURE CONTINUED
STEP 3
Cont.
Caution: When the TV is separ
ated, the top por
tion weighs 112 lbs.This task should be done by two persons to carry top portion when separating this TV.
This assembly contains fragile parts, such as glass and the viewing screen. Avoid any type of impact that could cause breakage of these components.
Remove top portion by grabbing the bottom corner of frame and the side of the TV, see (a)(b). Lift upwards, see (c)(d), gently place the top portion
on the the floor, see (e).
STEP 4
Remove the joint connector bolts from each side of the TV set using the allen wrench that is provided inside of the instruction bag, see (a) and (b).
(a)
(b)
STEP 5
Remove from the back side of the TV set only the top 4 screws of the lower rear cover, see (b), as shown by the arrows on the rear cabinet label,
see (a). Do not remove the rear cover board.
(b)
STEP 6
(a)
(b) (c)
(d)
(e)
(a)