Filter
Top Products
SETUP
70
ON-SCREEN DISPLAY
This function will automatically turn the Projection TV on and off, one time only, every day, or once a
week.
Use THUMB STICK ̄, ̆ to highlight Event 1, 2 or 3 and then press THUMBSTICK to select.
Use THUMB STICK ̈ to change position of On time, Off time, Antenna, Channel, and On/Off Frequency.
Use THUMB STICK ̆ or ̄ to select the time the TV will turn on and off.
Use THUMB STICK ̆ or ̄ to select the day of the week you want the timer to turn on TV.
Use number buttons to set the channel the TV will tune to when it automatically turns on.
Use THUMB STICK ̆ or ̄ to select mode Once (TV will turn on/off one time only), Daily (TV will turn on/off at the same time every
day), or Weekly-SUN (TV will turn on/off at same time every week).
Press EXIT to quit the menu.
NOTE: 1. The Event Timer will be disabled if the clock setting is changed.
2. When the INFO button is pressed, the Event Timer Icon will only display the current date ON/OFF timer.
3. The Off Timer will only activate if the TV was turned on by the On Timer and no channel selection was
made after this time. If you change the channel after the On Timer has been activated, the Off Timer will deactivate.
4. If no remote control button is pressed after Event Timer is activated, the TV will automatically turn off after three hours.
Therefore, do not Set Event Timer for more than three hours if you do not plan to control your television with the remote
control.
CAUTION: Do not use your TV as a deterrent when away from home by using the On and Off Timers. For safety, the TV
should be turned off when you are away from home.
Set Event Timer
THUMB
STICK
SELECT
Setup
Move
SEL
Return
Set Event Timer
Event 1 --:-- AM --:-- AM Jan. 1, 2003
Ant A Ch --
Event 2 --:-- AM --:-- AM Jan. 1, 2003
Ant A Ch --
Event 3 --:-- AM --:-- AM Jan. 1, 2003
Ant A Ch --
Setup
Move
SEL
On/Off
Set Event Timer
Event 1
--:-- AM --:-- AM Jan. 1, 2003
Ant A Ch --
Event 2 --:-- AM --:-- AM Jan. 1, 2003
Ant A Ch --
Event 3 --:-- AM --:-- AM Jan. 1, 2003
Ant A Ch --
THUMB
STICK
Return
Set The Clock
Magic Focus Tune Up
Setup
Set The Inputs
Move
SEL
Select
Set The Color System
Set Virtual HD
Set Black Side Panel
Menu Preference
Set Event Timer
Set Closed Caption
About Your TV
Please Set Clock First.
If the clock is not set, you can not use this function and the screen below will appear. The message on the screen will disappear after
3 seconds, then the screen automatically goes to the clock setup mode (see page 67).