Filter
Top Products
41
OTHER FUNCTIONS
ASPECT MODE
˄The function shown as below is designed for the C43-FL9000 model.˅
1.When non HD component signal is received
You may set different aspect modes to view the image with different signal formats.
You can change between four different modes,
lj
4:3
NJ
,
lj
4:3 Zoom
NJ
,
lj
16:9
NJ
and
lj
16:9 Zoom
NJ
.
Please see the following on each of four modes for details.
ƽTo switch aspect mode, please press the P.SIZE button, the TV will display the corresponding aspect mode
momentarily on the lower part of the screen. For example, set the current aspect mode to
lj
4:3
NJ
as shown on
the lower left side. If
lj
4:3 Zoom
NJ
is set as shown on the lower right side, you can press the ŸP+ źP-
cursor buttons to adjust the display position up and down before the words
Ālj=RRPNJ6FUROOā
disappears as shown on the lower right side.
`
2.When HD component signal is received
Press the P.SIZE button to switch between two different modes,
lj
16:9
NJ
and
lj
16:9Zoom
NJ
.
Remark:
If you change program No. or power on the TV, the aspect mode will return to the mode of
lj
16:9
NJ
(when HD
signal is received ) or
lj
4:3
NJ
(when conventional signal is received).
Notes
˖
1ˊ Do not watch TV at non full screen, as this may cause damage to your PRT.
2ˊ Using this special function (aspect mode) to change the size of image displayed (i.e., change the ratio of
height and width) for the purpose of public release or some commercial interests may infringe the
copyright law.
3ˊ In multi picture, pressing the P.SIZE button does not function.
ljNJ
Signal sources
ljNJ
lj=RRPNJ
ljNJ
Suggested
aspect
mode
lj=RRPNJ
lj=RRPNJ6FUROO
For example:
Conventional TV
b
roadcast forma
t
For example:
signal transformed
from HD
For example:
16:9 widescreen cinema