Filter
Top Products
16
ENGLISH
OPERATING INSTRUCTIONS
(continued)
Press the SELECT buttons (remote controller
and keys) to move the pink marker to
select an item.
Press the VOLUME button and the ▲ and ▼
keys of the main unit ( or key of the
remote control) to adjust or set the selected
item, or to switch the menu.
When a choice is followed by “:”, it indicates that the
choice can be adjusted or changed.
When a choice is followed by ▲, a menu can be opened
by pressing the remote-controller SELECT button or
the set VOLUME button ▲.
When [RETURN] is selected, press the remote-
controller button SELECT or the set VOLUME
button ▼ to exit to the original menu
For information on adjusting and setting
choices, see to .
PICTURE
SOUND
DISPLAY
FUNCTION
MAIN MENU
MENU
SELECT
Remote
controller
CONTRAST :117
BRIGHTNESS : 0
COLOR SELECT:NORMAL
COLOR BALANCE
OPTIONS
RETURN
PICTURE MENU
Pink
Pink when brightness
is selected
Guidance
Press the MENU button once again to exit the adjustment menu.
The adjustment menu will close automatically when no keys are entered for 10 seconds.
17
21
Press the MENU button to open an adjustment menu allowing you to complete various
adjustments and settings using the SELECT buttons (remote controller , ,
,
and
keys, or the set SELECT key).
Set unit
MENU
SELECT
[ VOLUME ]
Menu selection mark
HINTS
■ Burn-in (residual image) can occur if the same image is displayed for an
extended time. To reduce this possibility, change the display contents at suitable
intervals. To reduce this, it is recommended that you either change the display
contents at an appropriate interval or use the Burn In function .
■ If special images created on a PC or any other equipment (such as those
composed of a checker-flag pattern) are displayed across the screen, the hue may
be varied depending on the contrast or brightness setting.
18
On-Screen Display System, EasyMenu