Filter
Top Products
–
12
–
EN
1L01
HOOKUPS
DESCRIPTION-REAR PANEL
S-VIDEO
OUT
COMPONENT
VIDEO OUT
ANALOG
AUDIO OUT
DIGITAL
AUDIO OUT
VIDEO
OUT
Y
C
B
CR
RLCOAXIALOPTICAL
1
2345
1. DIGITAL AUDIO OUT JACKS:
Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiber. Use to
connect to a Dolby Digital decoder or DTS decoder.
2. ANALOG AUDIO OUT JACKS
Connect to the Audio input jacks of A/V-compatible TV or wide screen TV, Stereo system.
3. VIDEO OUT JACK
Use a video cable to connect one of the jack to Video input on your A/V-compatible TV or wide screen
TV, Stereo system.
4. COMPONENT VIDEO OUT JACKS
Use these jacks if you have a TV with Component Video in jacks. These jacks provide C
R
, C
B
and Y
video. Along with S-Video, Component Video provides the best picture quality.
5. S-VIDEO OUT JACK
Use the S-Video cable to connect this jack to the S-Video jack on your A/V-compatible TV or wide screen
TV for a higher quality picture.
“DTS” and “DTS Digital Out” are
trademarks of Digital Theater
Systems, Inc.
Manufactured under license from
Dolby Laboratories.“Dolby” and the
double-D symbol are trademarks of
Dolby Laboratories.
DV-P325U
only
E5610UD 2002.1.15 3:24 PM Page 12