Hitachi L37A01A Flat Panel Television User Manual


 
7
ABOUT LCD PANEL
Other Common Characteristics of LCD Panel
The following are the common phenomena when operating LCD Panel due to its structural reason. Please note
that they are not malfunctions.
Defective Spots on Panel
The LCD panel is manufactured with high-precision technology. However, there might be some spots that are
not emitted, brighter than the others, or in different colors, etc.
Surface on Panel
The LCD panel displays images by blinking the fluorescent lamps internally. This could raise the temperature of
the display surface.
In addition, do not impact strongly on the surface of the panel because LCD panel is made with fine processing
glass.
Residual image
When a still image or menu is displayed on the screen for a short time (about a minute) and then switches to
another image, it may leave an “after-image” on the screen.
The residual image will disappear on its own.
The Usage under the Low Temperature Environment
Because of the structural characteristics of the LCD panel, the response speed of the LCD panel becomes
slower when the ambient temperature around the television becomes too low. In some cases, it may cause
the residual image.
The residual image will disappear on its own as the temperature goes up and back to normal.