Hitachi L42N03A Flat Panel Television User Manual


 
1
Stereo/Bilingual Sound Selection
When receiving stereo/bilingual sound system, you
can select the sound output modes by using .
To select stereo sound program
1
When a stereo program is received, “
appears on the screen.
2
Press to select “ ” or “ ”.
To select bilingual sound program
1
When a bilingual program is received, “
appears on the screen.
2
Press to select the sound to be heard.
Audio Signal
Stereo
Main
Language
Sub
Language
Mode
Mono
Force
Mono
Select “ ” in case of poor reception, noise or poor
stereo sound due to signal condition so that you can
receive a clear mono sound.
Picture Size Selection
Depending on the input signal, you can select the
desired picture size by pressing repeatedly.
For Standard Definition (SD) Pictures
(480i, 480p, 576i, 576p)
Auto
Automatically adjust the aspect ratio
based on the TV program signal.
Full
Stretch a 4:3 picture horizontally to fill
the 16:9 screen.
4:3
Display a 4:3 picture in its original
size. Black bars appear on both left
and right sides.
Panoramic
Enlarge a 4:3 picture linearly from
the center towards the edges of the
display.
Zoom
Display a 16:9 picture in 4:3 frame
(Vista size).
Cinema
Display a 1:9 picture in 4:3 frame
(Cinema size) expanding vertically.
For High Definition (HD) Pictures
(720p, 1080i, 1080p)
Full1
Display a 16:9 picture in 95% of the
size.
Full
Display a 16:9 picture in its original
size.
4:3 Zoom
Stretch a 4:3 picture horizontally to fill
the 16:9 screen.
For RGB Input
Full
Stretch a 4:3 picture horizontally to fill
the 16:9 screen.
4:3
Display a 4:3 picture in its original
size. Black bars appear on both left
and right sides.
In some cases, the screen display may has slight
blanking or noise at the edges.
Multi Picture Mode Selection
Multi Picture Mode allows you to
view two pictures from different
sources on the same screen
simultaneously.
Sub
Main
1
Press to activate Multi Picture Mode.
PIP screen displays. The speaker icon
will be displayed on the screen with sound
output.
2
Press to switch sound output between the
main and sub screen.
3
Press repeatedly to select the input
source (TV, AV1, AV or AV3).
4
Press / or Program Select buttons to
select the TV channel.
5
Press to exit Multi Picture Mode.
The main screen picture is only available for AV4,
RGB, HDMI1~3 and the sub screen picture is only
available for TV, AV1~3.