Hitachi CP-S833W Projection Television User Manual


 
21
4. Initial set signals
The following signals are initially set. The settings may be different depending on the computer type. In
this case, adjust the settings referring to pages 15, 16.
Connection to the RGB signal terminal(continued)
Back porch(b)
Back porch(b)
Sync.(a)
Front porch(d)
Active(c)
Sync.(a)
Front porch(d)
Active(c)
Computer/signal
Horizontal Timing (µs)
abcd
VGA-1 3.8 1.9 25.4 0.6
PC-9800 3.0 3.8 30.4 3.0
VGA-2 3.8 1.9 25.4 0.6
VESA (85Hz) 1.6 2.2 17.8 1.6
VGA-3 3.8 1.9 25.4 0.6
Mac 13inch mode 2.1 3.2 21.2 2.1
VESA (72Hz) 1.3 4.1 20.3 0.8
VESA (75Hz) 2.0 3.8 20.3 0.5
SVGA (56Hz) 2.0 3.6 22.2 0.7
Computer/signal
Horizontal Timing (µs)
abcd
SVGA (60Hz) 3.2 2.2 20.0 1.0
SVGA (72Hz) 2.4 1.3 16.0 1.1
SVGA (75Hz) 1.6 3.2 16.2 0.3
SVGA (85Hz) 1.1 2.7 14.2 0.6
Mac 16inch mode 1.1 3.9 14.5 0.6
XGA VESA (60Hz)
2.1 2.5 15.8 0.4
XGA VESA (70Hz)
1.8 1.9 13.7 0.3
XGA VESA (75Hz)
1.2 2.2 13.0 0.2
Computer/signal
Vertical Timing (lines)
abcd
VGA-1 2 59 350 38
PC-9800 8 25 400 7
VGA-2 2 34 400 13
VESA (85Hz) 3 25 480 1
VGA-3 2 33 480 10
Mac 13inch mode 3 39 480 3
VESA (72Hz) 3 28 480 9
VESA (75Hz) 3 16 480 1
SVGA (56Hz) 2 22 600 1
Computer/signal
Vertical Timing (lines)
abcd
SVGA (60Hz) 4 23 600 1
SVGA (72Hz) 6 23 600 37
SVGA (75Hz) 3 21 600 1
SVGA (85Hz) 3 27 600 1
Mac 16inch mode 3 39 624 1
XGA VESA (60Hz)
6 29 768 3
XGA VESA (70Hz)
6 29 768 3
XGA VESA (75Hz)
3 28 768 1