Filter
Top Products
50
4 Press the and cursor button to set the STEREO/MONO option to "STEREO".
5 Press the
and cursor button to set the SAP option to "ON".
6 Press the GUIDE button to end the setting.
7 Follow the Step 1 through 6 on "Basic Recording Steps" on pages 33 and 40.
• Stereo vs. mono sound
When you select the STEREO option in the initial setup operation, your VCR records in stereo any station that
broadcasts stereo sounds. When a TV channel broadcasts in stereo, you'll see a stereo indicator on the TV
screen.
Set to MONO if the stereo signal is weak and the sound is too "noisy".
Note: When you select MONO, sound is recorded as mono even when a channel broadcasts in stereo.
DELAYED RECORDING
Setting the VCR to record later
Note: The cassette safety tab must be in place in order to record.
With the delayed recording feature, you can set this VCR so that it automatically turns on and records programs
whenever you like - without your being around! You can record a program one time only, or you can automatically
record a show every weekday or every week at the same time. You can preset as many as 8 timed recordings at
once.