Filter
Top Products
RECORDING - 31 -
NOTE: To prevent tape damage, after five minutes, the VCR will automatically switch to the Stop mode. You may
review the time remaining with "" marks on the TV screen. Each "" mark shows one minute.
EDIT SEARCH
To edit an unwanted segment from the already recorded portion of tape while VCR remains in record mode.
1) Press PAUSE button.
2) Press and hold REW button until you have reached the beginning of the unwanted segment. (If you rewind past
the beginning of the unwanted segment, press and hold F.FWD button until you have reached it.)
NOTE: If you do not press PAUSE button again within five minutes, VCR will automatically switch to the Stop
mode.
3) Press PAUSE or REC button to resume recording.
RECORDING ONE PROGRAM WHILE VIEWING ANOTHER
You can record one program while viewing another. To start recording, follow steps [1] to [3] under "VIEWING
AND RECORDING THE SAME PROGRAM".
NOTE: When you record with a cable converter box, you cannot record one program while viewing another.
4 Select the TV mode
Press VCR/TV button on the remote control to select TV so that the "VCR" disappears from the display.
5 Select the channel on the TV
Set the TV to the channel you want to watch.
TO MONITOR THE PROGRESS OF YOUR RECORDING
1 Select the VCR mode
Press VCR/TV button on the remote control to select TV so that the "VCR" appears on the display
2 Select channel 3 or 4 on the TV
Turn on the TV and set the TV channel to the same video output channel as located on the back of the VCR.
(CH3 or 4)