Filter
Top Products
PRE-TUNING THE VCR TUNER
36
Note: Your VCR is capable of receiving 68 broadcast TV channels (VHF 2 – 13,
UHF 14 – 69) and cable channels (CATV 1 – 125). In some areas channels
cannot be received when CATV1 is selected. In this case, select CATV2 in the
receiving setup.
PRE-TUNING THE VCR TUNER (cont.) pg. 2
When automatic presetting of channels are finished
Press the CH (channel) button (or numbered buttons) to check the
channels you can receive.
or Selects Channel "7"
Note: If no channels have been set or a clear picture does not appear, check the
antenna or cable connection.
To add or erase channels
The auto channel set procedure may memorize channels that are
blank, have snowy pictures, or interference. You may skip these
channels by erasing them. Very weak stations might not be
memorized at all. You may receive these stations by adding them.
pic
1 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
MENU
1 DVHS 2 VCR 3
SETUP SETUP CHANNEL
4 5