Filter
Top Products
26
2 Press the (2) button to select the VCR SETUP operation.
Remote Control Illustration.
3 Press the (4) button to select "HIFI" or "LINEAR".
• Select Hi-Fi to playback sound recorded on the Hi-Fi track and for normal use.
• Select LINEAR to play back the sound recorded on the linear monaural track. Also, if the audio sounds distorted
or unusual or there is no audio, select LINEAR.
4 Press the GUIDE button to end the setting.
USING THE "SUPER INDEX" FEATURE
• What is SUPER INDEX
SUPER INDEX allows you to quickly search for a program or a scene you want to view or the
point from which you want to start recording on tape, with the following four functions:
• INDEX SEARCH: You can locate the beginning of a recorded program, using the INDEX
feature*.
* Each time you press the REC or REC/IRT button to start recording, the VCR will record an
INDEX mark at the start of recording. The INDEX feature uses this signal recorded on tapes
(VISS signal) to locate the beginning of a program you want to view.
• BLANK SEARCH: You can locate the beginning of a blank (non-recorded) section on tape.
• EASY VIEW: This switches fast forward or rewind to visual search so that you can search for
a scene you want to view while scanning the pictures
• SKIP PLAY: You can skip unnecessary scenes during play.
• Locating the beginning of a recorded program (INDEX SEARCH)
NOTE: This function only works with recordings that have been set up with indexing.
Remote Control Illustration.
1 Press the (-) button for rewind or the (+) button for forward to begin the index search in the STOP