Filter
Top Products
PROGRAMMING THE VCR REMOTE CONTROL TO CONTROL YOUR CABLE BOX
The VCR remote control can be programmed to control many cable boxes that are remote controlled. You
can easily change channels.
1 Turn on the cable box.
2 Point VCR remote control toward cable box
3 Press and hold the "CATV" button.
4 Press the number button corresponding to your cable box as shown in the set-up chart. The cable box
channel will change to confirm that the remote control has been set.
Cable Box Press "CATV"
and this
number button
Cable Box Press "CATV"
and this
number button
Jerrold 1 1 Zenith 5
Jerrold 2 2 Scientific
Atlanta
6
Jerrold 3 3 Pioneer 7
Hamlin 4 Philips 8
Note: If your cable box is not listed on the Set-Up Chart, try all the buttons listed in the chart until the cable box
changes channels. If the cable box channel does not change, you won't be able to program the remote for your
cable box.
Using the VCR remote to control your cable box
1 Press the "CATV" button on remote control.
2 Point VCR remote control toward cable box.
3 Press buttons corresponding to the functions available on your cable box remote control.