Honeywell 7845gsmr TV Cables User Manual


  Open as PDF
of 2
 
TIE-WRAP
POINT
WIRE
ROUTING
TUNNELS
TIE WRAP
NOTE
ENSURE ALL WIRING
IS ROUTED THROUGH
WIRE STRAIN
RELIEF CLIP
WIRE STRAIN
RELIEF CLIP
TIE WRAP
MOUNT
OR
LYNXGSMEXTCB-005-V0
CABLE ASSEMBLY
LYNXGSMEXTCB
(P/N 600-00151)
CABLE ASSEMBLY
LYNXGSMEXTCB
(P/N 600-00151)
Figure 2. LYNX PLUS Cable Routing
Connecting the GSMV and 7845GSMR
Power for the GSMV or 7845GSMR is provided by the LYNX Series Control. Do not install the battery in the
GSMV or 7845GSMR. Connecting the battery will significantly decrease the backup battery life of the LYNX
Series controls.
1. Connect the connector of the LYNXGSMEXTCB Cable Assembly (P/N 600-00151) to the communications port on
the LYNX PLUS, LYNXR-I or LYNXR-2 as in Figure 3. For the LYNX PLUS ensure that the cable is properly
routed as shown on Figure 2.
2. Connect the four stripped wires from the LYNXGSMEXTCB Cable Assembly (P/N 600-00151) to the GSMV or
7845GSMR as shown in Figure 3.
3. Connect a jumper wire between Terminal 2 and 3 on the GSMV or 7845GSMR as shown in Figure 3.
LYNXR-I /
LYNXR-2
SERIES
7845GSMR
OR
GSMV
GSM/GSML
Port
LYNXGSMEXTCB-006-V0
TB 1
8765 111094321
BLACK
GREEN
RED
YELLOW
BLACK
GREEN
RED
YELLOW
Jumper
Wire
Yellow
Red
Green
2 3 41
1110
LYNX PLUS
Power Line
Carrier
Connector
Battery
Connectors
GSM/GSML
Port
Standard
Super Hi
SALCLASSIC
BLACK
GREEN
RED
YELLOW
ECP +
ECP In
GND
ECP Out
OR
CABLE ASSEMBLY
LYNXGSMEXTCB
(P/N 600-00151)
CABLE ASSEMBLY
LYNXGSMEXTCB
(P/N 600-00151)
CABLE ASSEMBLY
LYNXGSMEXTCB
(P/N 600-00151)
Figure 3. 7845GSMR or GSMV Connections
Ê800-07760@Š
800-07760 10/10 Rev. A
2 Corporate Center Drive, Suite 100
P.O. Box 9040, Melville, NY 11747
Copyright © 2010 Honeywell International Inc.
www.honeywell.com/security
 previous