Honeywell HREP4 DVR User Manual


  Open as PDF
of 2
 
www.honeywellvideo.com
+1.800.796.CCTV (North America only)
HVSsupport@honeywell.com
Document 800-07015 – Rev B – 09/10
© 2010 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any
means without written permission from Honeywell. The information in this publication is believed to be
accurate in all respects. However, Honeywell cannot assume responsibility for any consequences resulting
from the use thereof. The information contained herein is subject to change without notice. Revisions or new
editions to this publication may be issued to incorporate such changes.
Playback Control
Playback Controls
A DISPLAY - change multi-view mode
BPlayback Controls
CBACKUP - start backup/archive to
external device
DRETURN - exit from playback mode
ETime indicator
A
B
C
D
E
Searching by Event
1. Select SEARCH BY EVENT.
2. Select search event categories for
the search.
3. Set a search START/END time.
4. Click SEARCH.
5. Double-click an event in the
search query results list to play
that clip.
Archiving Searched Video
1. Click SEARCH on the LIVE screen.
2. Search for recorded video by either
searching by Date/Time or searching by
Event.
3. Select a starting point for playback,
click Play to find the beginning of
the clip you want to archive, then click
Pause to pause playback.
4. Click to mark the beginning of the
video you want to archive.
5. Enter a TAG name, select the cameras
you want to archive, then click START.
The display returns to playback.
6. Click Pause to pause playback, click
, then click STOP to mark the end of
the clip.
7. Click RESERVE, then click CLOSE.
8. Click to exit playback mode, then
click CLOSE to exit the SEARCH menu.
9. Click on the main menu.
10. Click RESERVED DATA
MANAGEMENT, select the clip by
name in the AVI ARCHIVE LIST, then
click BURN.
11. Select a DEVICE and a BURNING
TYPE, then click START.
Archiving Video from the LIVE Screen
System Setup
RECORD Menu Setup
Configuring the Network IP Settings
1. Click ARCH on the LIVE screen.
2. Select NEW ARCHIVE.
3. Set the START/END time for
archiving.
4. Click QUERY.
5. Check the data size and select the
device to which the data is saved
(CD, DVD, or USB media).
6. Enter a TAG NAME to name the folder
on the device.
7. Click BURN to burn the clip to the
chosen media.
8. Select a DEVICE and a BURNING
TYPE, then click START.
2
3
4
5
5
7
Changing the OSD Language
1. Click MENU.
2. Select SYSTEM SETUP.
3. Select DISPLAY.
4. Select OSD.
5. Select the desired language.
6. Click APPLY.
Configuring Recording Parameters
To change the recording configurations from the default settings, select
RECORD SETUP, then make the desired changes. Refer to your HREP4,
HREP8, HREP16 User Guide.
1. Select NETWORK on the MAIN menu.
2. Uncheck DHCP for static IP setting.
3. Enter the IP information that you get
from your network administrator.
4. Check the service ports for WEB and
RTSP (2 ports only).
5. Use AUTO PORT when your router
supports UPNP.
6. Click AUTO PORT to see the
connection address in the ALIAS field.
Note The default IP setting is DHCP, so you do not need to manually set the IP
address. Your router will assign the IP address automatically.
DDNS Settings
3
4
For information about configuring the DDNS settings, please refer to the DDNS Application note
(document 800-07045).
2
Connecting through the Internet
For connecting through the internet, the 554 and 8080 ports should be set to Port Forwarding at
the router.
1. Open Internet Explorer.
2. Enter the IP Address or the URL of your DVR into the IE Explorer Address bar:
• http://XXX.XXX.XXX.XXX
• http://XXX.XXX.XXX.XXX:PPPP} (if you are using another Web port)
(PPPP = the assigned web port number)
3. Enter the Default ID (ADMIN) and password (1234), then click OK.
4. Allow ActiveX to download.
Note If you cannot download ActiveX, then go to the Security tab in IE and check all ActiveX
options.
5. Install ActiveX.
The LIVE view window opens.
In addition to LIVE view, users can
access SEARCH and SETUP,
depending on their User Authority
privileges. Refer to your HREP4,
HREP8, HREP16 User Guide for more
information about User Authority.
 previous