Humax DTT-nano Satellite TV System User Manual


 
www.humaxdirect.it / www.mediasat.com
DTT-nano
Digital Terrestrial MHP embedded Set-Top Box
Specification
Tuner & Demodulator
No. of tuners 1
RF Input connector IEC 169-2, female (PAL)
System Resource
RF loopthrough connector IEC 169-2, male (PAL)
Input frequency range 174MHz ~ 230MHz and 470MHz ~ 862MHz
Signal level -10 to -70 dBm
Modulation OFDM
Compliant to EN 300 744
Mode 2K, 8K
FEC Mode 1/2, 2/3, 3/4, 5/6 and 7/8
Guard Interval 1/4, 1/8, 1/16 and 1/32
Constellation QPSK, 16-QAM, 64-QAM
Flash Memory 8Mbytes
SDRAM DDR
64Mbytes
EEPROM 64Kbits
Conditional Access System
Embedded CAS Nagravision, Irdeto, Conax
Smart card 1
Specifications and functions may be changed for improvement without notice in advance.
A/V output
Digital audio 1 SPDIF
Data Port
RS-232C 1
Front panel interface
Smart card slot 1
Tuner 1 Input with 1 loop through
SCART 1 SCART
Rear panel interface
Main power cable Fixed
S/PDIF 1 SPDIF
Data port 1 RS-232C (4pin D-SUB)
Type Switching Mode Power Supply (SMPS)
Power consumption
Opeartion: Max. 9W
Standby: Max. 8W
Power Supply
Input voltage AC 90~250, 50/60Hz, SFIPS1
Protection
Separate internal fuse & lightning protection
Weight (net) 139 g
Physical specification
Size (Width x Height x Depth) 146.2 x 24 x 64 mm
HUMAX Co., Ltd. Italy
Centro Direzione SUMMIT(Scala D1, 4 piano), Via Brescia, 28 Cernusco S/N(MI), 20063, Italy
Commercial inquiry to vendita@humaxdigital.com
SCART 1 SCART
MPEG2
Transport stream MPEG-2 ISO/IEC 13818
Video decoding
MPEG-2 Main Profile @ Main Level
Video stream rate Max. 15Mbps
Video formats 4:3(default), 16:9 Letterbox
Video output RGB, CVBS
Video resolution PAL-25 frame @720 x 576
Audio decoding MPEG Layer I & II (MUSICAM)
Audio layer
Layer I & II
Audio mode
single / dual mono / stereo / joint stereo
Accessaries
Quick guide, External IR Module, RCU, Battery, Adaptor, Scart Cable(female to male)
Modem
1 (V.90)
ANTENN
ANTENN
A IN
IN
TV/VCR
TV/VCR