Filter
Top Products
The details of service part and event part are automatically
displayed on the I-Plate when pressing the i button( ) or
changing services.
I-Plate is divided into service part and event part.
SERVICE PART consists of the following items:
• I-Plate icon, Current time and Dolby Digital symbol
• Service name, Service number, icons
• Subtitle, Teletext, Scrambling service symbol
(These are automatically displayed when the broadcasting
station provides appropriate information.)
• Signal level and Signal quality bar
EVENT PART consists of the following items:
• Event name, Event duration time
• Description text of event, State of reserved event
Event Part shows the current and next event information.
button : Use to move from the current event information to
the next event information.
button : Use to move from the next event information to
the current event information.
When the HELP( )button is pressed under I-Plate display and
there are no detailed event informations in the I-Plate,
the Help window will appear on the screen.
The Help window shows the current Network information, including:
Satellite Name, Frequency, Polarisation, Symbol Rate, FEC...
The detailed information for the event can be displayed by pressing
the HELP( )button in the I-Plate with event data displaying mode.
You can reserve the programme in the event data display mode by
using the WHITE( )button.
You can reset timer programme Once, Daily or Weekly mode.
When you release the timer programme mode, then you will be
asked to confirm the action.
To change services, do in the following sequence;
1. Press the NUMERIC buttons(0~9) on the remote control unit.
2. Press the buttons or buttons.
Or press the RECALL( ), Service-list(OK), EPG( )mode button.
To switch between TV and Radio services, press the TV/Radio
( ) button.
To select the previous viewed Service, press the RECALL( )
button.
Changing Services
Information Box(I-Plate)
SERVICE-PART(Left side of the box)
EVENT-PART(Right side of the box)
Guide of Functions
E13