Filter
Top Products
**
When powering on your product for the first time after purchase, the Selecting Language screen is automatically displayed. Select
your desired language using the
button and press the OK button. Then the Antenna Setting menu will be displayed.
The default PIN code is 0000.
**
4.1 Antenna Setting
You can set antenna and LNB information to search services using Antenna Setting (MENU-INSTALLATION-SERVICE
SEARCHING-ANTENNA SETTING).
**
• Antenna Alternative: Select antenna alternative which has different
combinations of settings for search. Antenna Alternative 16 is predefined for
SMATV.
• Satellite Name: Displays the satellite list in name order. If the desired
satellite name is not listed, then select "User Defined". You can enter the
Satellite Name using the keyboard displayed on the screen.
• LNB Frequency: Select the L.O (Local Oscillator) Frequency of the LNB.
• 22KHz Tone: When using the 22HKz tone switch, select "Enabled".
Otherwise, select "Disabled".
• DiSEqC Input: If you are using DiSEqC (Digital Satellite Equipment
Control) switch to connect multiple antennas or LNBs, select DiSEqC input
to connect to antenna or LNB.
• Motorised System: When using motorized system, select from "DiSEqC
1.2" or "USALS". Otherwise, select "Disabled". When motorized system is
set to "DiSEqC 1.2" or "USALS", DiSEqC input is disabled.
• LNB Power: You can select "On" or "Off".
**
When you complete the settings, press the OK button to move to the Manual Search menu.
GB 16