Humax IR-ACE II Satellite TV System User Manual


 
&7+ 
In order to maintain proper performance of the product, it is essential to have the most up-to-date
software. Visit the Humax website to check the latest news and newly released software versions.
http://www.humaxdigital.com. It is recommended that you periodically check for the availability of
software update.
& 521 954  1:
OTA, an abbreviation of Over–the-Air, is a standard for the transmission of software through a
broadcast system.
OTA is simply an alternative method for downloading software versions. However, the
manufacturers reserve the right for deciding the release of the software for their products by
beaming the latest software versions over the air via satellite. Note that OTA is only limited to
certain geographical regions mainly due to different antennas having different footprints(area where
the signal can be received). The software update via satellite will only occur under the following
circumstances.
1. The equipment should have appropriate loader software.
Caution:
Please note that if normal loader software is not equipped, the product may not be updated or
operate properly after software update.
**
2. The manufacturer decides to release the software via a designated satellite.
3. The equipment must be tuned properly to the same antenna equivalent to that of the
manufacturer.
4. Update software when the signal strength and quality is high. If the weather is not favorable,
and the signal strength and quality are not recommendable, perform the software update
later.
Caution:
Please be careful to keep the power on and the power cord plugged in during software
update. If the power is off during software update, fatal damage may be caused to the
product.
Please be careful not to pull out the signal line (LNB cable) during software update. Update
may be interrupted and the product may not operate.
Caution:
It may take 5 ~10 minutes to update software.
Other functions will not activate while software update takes place.
You cannot schedule recording during software update.The installation wizard pops up
automatically and assists channel search.
& 7 + 
 #