Filter
Top Products
GBGB40
Set the video mode that is output from the TV SCART and
RCA/Cinch Jack.
1. Move the cursor to Video Output.
2. Select CVBS/S-Video or RGB using the buttons.
Set the audio mode that is output from the TV SCART and
RCA/Cinch Jack.
1. Move the cursor to Audio Output.
2. Select STEREO or MONO, using the buttons.
If the Dolby Digital option is ON and the broadcaster provides the
Dolby Digital stream, the Dolby Digital audio language is firstly
selected when changing the service.
1. Move the cursor to Dolby Digital.
2. Select ON or OFF using the buttons and press the OK
button.
1. Move the cursor to screen mode.
2. Use the buttons to Select the aspect ratio of the TV which
is connected to STB (4:3 or 16:9).
Select the format in which the video is to be displayed on screen.
If your TV set is 4:3 and video source is 16:9, STB will display in
the Letter-box or Centre mode as selected.
If your TV set is 16:9 and video source is 4:3, STB will display in
the Pillar-box or Full mode as selected.
Audio Output
Video Output(CVBS/S-Video/RGB)
Dolby Digital
A/V Output Setting
Screen Mode
Display Format
PVR-8000 ENG 1/21/03 11:10 PM Page 45