Filter
Top Products
GBGB46
• Start/Reserve
‘Start’ starts recording.
‘Reserve’ reserves recording.
After Reserve is activated, the Record window is closed and
reserved information is listed on the Reserve List window.
Record Reserve operates as follows.
1) When STB is in standby at a set start time of reserved
recording:
The STB starts operating, switches channels for an
appropriate service, and then starts recording the channel.
After recording is complete, the STB will return to the state of
standby.
2) When STB is operating (on) at a set start time of reserved
recording:
The STB doesn’t switch channels for a reserved service,
and it records a reserved service while the current channel is
being viewed. After recording is complete, the STB will return
to the state of operating.
Reserve List enables you to display or delete view/record reserved
services. It operates only with the RSV LIST( ) button on the
remote control unit. It consists of Reserved Channel, Schedule,
Mode and Operation.
Reserve List shows the current view/record reserved services.
In case of View Reserve, an alphabet “V” will be marked.
In case of Record Reserve, an alphabet “R” will be marked.
Reserved services are up to maximum 20 by summing up
view/record reserved services.
Program Name shows the name of the program of the service
where the cursor is located when a service has been reserved on
the EPG window. It is updated each time the cursor moves up or
down. When you have registered a record-reserved service on
the Record window, nothing will be displayed.When the Reserve
List window is activated after the start time of a reserved service,
the reserved service will be deleted from the list.
Reserve List
Using the Operation Window
PVR-8000 ENG 1/21/03 11:10 PM Page 51