Humax VACI-5300 Satellite TV System User Manual


 
GB3
VIACCESS
TM
is a trademark of France Telecom.
CryptoWorks(TM) is a trademark of Philips Electronics N.V.
Irdeto is a trademark of Mindport BV.
Nagravision is a registered trademark of Kudelski S.A.
Conax is a trademark of Telenor Conax AS.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
HUMAX cannot be held responsible for any kind of problems caused by the use
of unofficial software. The use of software versions other than HUMAX official
software will void the manufacturer’s warranty.
It is advised that only the formal software released from HUMAX should be used in
all HUMAX product range.
To watch Pay Per View programmes, be sure to inform your STB dealer of the STB’s
and Smart card’s serial numbers. So that they can pair your STB with your Smart card.
Otherwise, you cannot watch the programmes because they are scrambled
.
When the changed Network Information is sent, Nagravision realizes that the appropriate
satellite/cable service information has been changed. And it will re-organize the service
information based on the sent Network Information. The message “Network Information
updated...” appears on the screen. It is automatically done when changing NIT.
The manufacturer can’t change it because it is provided by Nagravision.
When the user watches it, the message may suddenly appear during AV playback and
simultaneously updating will proceed. (This happens about once a year.)
Since this is not an error in operating, do not turn off the power.
• Information for TV-Cabo subscriber
When user searchs channels, the channel numbers from 001 to 100 are defined
automatically for Nagravision by service provider.
Other channels have the number from 101 in sequence as the receiver searchs
the signal.
Specifications are for NACI-5700 models.
Copyright
Warning
Note
Caution
Copyright